Pool liner-swimming pool special pool bottom wall waterproof lined with PVC membrane

Pool Liner Features and Benefits

1. Environmental protection and health, long applicable life

The main raw material of this product is polyvinyl chloride, which is processed and produced through advanced technology. It is safe, non-toxic, odorless, recyclable, and environmentally friendly;

This product has the effect of anti-chlorine resistance, strong anti-corrosion effect, especially after long-term immersion in chlorine water, no deformation, no discoloration, corrosion resistance, UV resistance, no cracking, no falling off, no penetration, etc. The service life is as long as 10 years.

The middle layer of the product is added with density reinforcing ribs, so the thermal expansion and contraction of the product are synchronized, and there is no cracking, no falling off, and no leakage; the product is an elastic material, with strong resilience, no wrinkles, and high flexibility.

2. Excellent waterproof performance and low maintenance cost.

The product has internal waterproof function. If the tiled pool leaks, to completely solve the problem, all the tiles must be knocked out, waterproofed again, and then paved with decorative materials. Or it means to replenish water for a long time, which will be a lot of expenses in the long run; and the long-term water leakage of the swimming pool itself will also have an impact on the surrounding structure of the swimming pool, so for the swimming pool, waterproofing is the most important. Traditional tiles and mosaics not only have no internal waterproofing effect, but also fall off easily, hollow and crack under the condition of thermal expansion and cold contraction, which seriously damages the waterproofing of the base layer. The swimming pool film has a unique internal waterproof function, stable performance, not easy to fall off and deform, and effectively prevent the leakage of the pool to the outside, so that the swimming pool waterproof has a double protection function, which can reduce the construction cost of the project and greatly shorten the construction period;

The thermal insulation effect of the product is good. The closed design of the hot melt adhesive film swimming pool lining makes the temperature in the swimming pool slowly decrease, achieves a good thermal insulation effect, and can save energy and reduce consumption at the same time.

3. Easy installation, suitable for various scenarios

The product is installed by hot-melt welding, and the coil material is spliced, and the seams are less and stronger; and the construction period is short, the installation process is simple, and it can be applied to any structure and is easy to refurbish.

Traditional tiles and mosaics have a long laying cycle and require a lot of manpower and material resources. At the same time, once they encounter complex structures, it will be difficult to handle, and the process is very cumbersome. When maintenance is required in the future, in order to achieve the desired effect, it is often not to repair where there is a problem, but to repair a large area around it, and the maintenance cost is very high.

The swimming pool film only needs to use a special adhesive to install the film, and at the joints, in order to prevent cracks on the surface, and in order to achieve good internal and external effects, use sealant to cold or heat welding. The seams can be reinforced to look seamless. Due to the soft texture of the swimming pool film itself, no matter what structure or shape the swimming pool is, it can be easily constructed.

4. Easy to clean and maintain

The product is made of polymer material, which is not easy to adhere to dirt, reduces the growth of bacteria, and makes cleaning simple and fast;

Due to their special materials, traditional tiles and mosaics are easy to breed bacteria, and there are many connecting seams, which make them an excellent place to breed bacteria and microorganisms. At the same time, they will pollute the pool water and bring health risks to swimmers. .

The material of the swimming pool film has the characteristics of not easy to breed bacteria, strong anti-fouling ability, high elasticity, simple maintenance, and no need to release water in winter. The swimming pool waterproof decorative film is an integral structure, and with the natural pressure of water, it will not fall off, and it does not need to be repaired and maintained in the later stage. The service life of the swimming pool film is more than ten years, which greatly reduces the burden on the operator.

Compared with traditional mosaic tiles, which are easy to crack, easy to fall off, easy to leak, and have fewer colors, the hot-melt welded swimming pool adhesive film has a unique appearance design, and the swimming pool adhesive film pattern is customized.

If you want to buy this product, you can click this link: https://www.relleflooring.com/vinyl-pool-liner_p90.html