Rubber flooring is a floor made of natural rubber, synthetic rubber and other polymer materials. Butadiene benzene, high benzene, and butadiene rubber are synthetic rubbers, which are by-products of petroleum. Natural rubber refers to the rubber harvested from artificially cultivated rubber trees.

The wide practical range of rubber flooring includes medical institutions, gymnasiums, training halls, computer rooms, substations, precision instrument manufacturing and storage stations, match factories, fireworks factories, defense ammunition depots, warship anti-skid deck, offices, villa areas, pedestrian trails, ship anti-skid trails, nurseries, kindergartens, elderly activity centers, children's playground pools, massage rooms, shopping centers, welcome corridors, foyer, VIP room, sports tracks, waterproof courts etc.

Rubber floors are natural rubber and other synthetic rubber floors. In appearance, it is bright and bright in color, and its texture is as soft as rubber, which is suitable for sports as a bedding for sports occasions. As a floor decoration material, rubber flooring has been popular in developed countries for decades and has been widely used. Relle is committed to the development of high-end and durable rubber flooring. It is a large manufacturer in China and has rich export experience. It has been exported floor to many countries for floor construction projects.

Construction site requirements for rubber flooring

① It is forbidden to install at the site temperature below 10℃.

② All sub-floors must be dry, flat, crack-free, well-constructed, and clean. Free from dust, paint, paraffin, lubricating oil, grease, bitumen, rotting adhesives and other foreign impurities.

③ The rubber floor adopts seamless splicing, the splicing seams are straight, smooth and firmly bonded, and there is no obvious color difference in appearance.

④ All hardening treatments, quenching treatments and damaging compounds must only be removed by mechanical means.

⑤ The humidity of the bottom floor should be lower than 2.5%, and the bottom floor with humidity higher than 2.5% should not be recommended. If such humidity levels are higher than 2.5%, waterproofing should be done in accordance with industry standards.

⑥ Surface unevenness within 5 mm can be leveled with self-leveling after primer.

Construction preparation

The rubber floor should be moved to the construction site in advance to adapt to the site temperature for not less than 24 hours. When laying, it should be laid first, and the arrows on the back of the floor should be kept in the same direction, and then spliced ​​and cut according to the terrain and design plan.

Cleaning method

1. add 1 cup of fabric cleaner to each half of the water used for cleaning to make rubber floors look like they were freshly waxed.

2. using an all-purpose cleaner solution works well for cleaning rubber floors. We start by carefully reading the precautions on the product label, preferably testing in the corners of the floor before use.

3. remove the footprints on the rubber floor, you can use high-grade steel wool dipped in liquid floor wax. During the wiping process, gently wipe off the stains, and then dry them with a damp cloth.

4. always use a cleaner or dewaxer to remove accumulated wax.

5. solvent-based products can soften and destroy rubber floors.

6. do not wash the floor with water, too much water will make the adhesive of the floor fall off.

Relle rubber flooring link: https://www.relleflooring.com/rubber-flooring_c31